
Frequently Asked Questions
Answers to common questions about fencing, gates, and access control
Planning & Permits
In many cities and counties, yes. Permit requirements, maximum height, and setback rules vary by jurisdiction. In Jeffersonville, we handle the permit process for you. For other areas, you'll need to check with your local building or zoning office—we're happy to guide you through what's typically required.
Often yes. Many HOAs regulate height, color, and style, and may require an application with a site plan before approval.
Use your survey, closing documents, or hire a surveyor to mark boundaries. This is one of the most common causes of neighbor disputes, and it is worth verifying before digging.
Height limits vary by location and sometimes by front yard versus back yard. Confirm your local ordinance and HOA rules.
Sometimes yes, but there may be stricter height and visibility rules near streets, driveways, and intersections. Check local ordinances and HOA guidelines.
Setback rules vary. Some areas allow building right on the line, others require a setback. If the fence is shared or near a boundary, confirm local rules and talk with your neighbor early.
Yes. A quick conversation can prevent disputes about location, style, and who maintains which side of the fence. Shared boundary questions come up often.
Residential Fencing
Solid wood or vinyl privacy styles are typical choices. Your decision usually comes down to budget, desired look, and how much maintenance you want long term.
You want the right height, minimal climb points, and a layout that eliminates gaps. The right pick depends on your pet's size and behavior, and your yard layout.
Aluminum is popular for a clean, open look. Wood and vinyl can be styled many ways. Match the fence to the home style and the neighborhood norms, especially if HOA rules exist.
Vinyl and aluminum are commonly chosen for minimal upkeep compared with wood, which often needs staining or sealing over time.
Life span varies by material quality, installation quality, drainage, and sun exposure. Ask about material grade, post depth, and warranty coverage in writing.
Most homeowners want at least one service gate for mower access and trash bins. Gate placement should match your daily traffic patterns and any driveway or patio routes.
Pricing is usually based on linear feet plus gates, terrain, tear out, and material choice. You will see wide variation by region and material. Treat any number as directional until you get on site quotes.
Many standard residential projects can be completed in a few days, but the true timeline depends on permitting, utility marking, weather, and job complexity.
Mark property corners if surveyed, confirm gate locations, and clear the fence line of any obstructing items that may need to be relocated or removed.
Yes, a fence can be installed in the winter! Some lead times may be reduced. The only limiting factors are snow and ice, not the cold.
Some disturbance is normal from digging and moving materials. All attempts will be made to prevent damage to flower beds, gardens, trees, and other landscaping.
Wood often needs periodic sealing or staining. Vinyl and aluminum typically need occasional cleaning. Ask for a simple care plan at turnover.
This varies by local rules and neighbor agreements. If it is a shared fence, clarify who pays for repairs and who approves changes.
Ask about licensing and insurance, who pulls permits, what warranty is provided, what materials are used, how gates are framed, how they handle slopes, and whether you will receive a written scope of work.
Commercial Fencing
Often yes. Commercial sites frequently have zoning, code, and access requirements that influence fence height, placement, and gate design.
Limits vary by city and zoning. Anything taller than the typical allowance may require additional approvals. Confirm with local authorities for your site.
Yes. Industry groups publish resources that reference applicable ASTM and related specifications for chain link systems and security applications.
Many sites choose chain link for perimeter security, often with heavier duty fabric, stronger posts, and optional deterrent toppings depending on the risk level and local rules.
Start with your objective: theft deterrence, controlled access, equipment protection, or liability reduction. Then match fence height, mesh, post spacing, and gate strategy to the risk.
Yes, when it is designed to control access, protect hazards, and guide traffic. The fence and gates should not create unsafe pinch points or obstruct required access routes.
Underbuilding gates that see daily traffic, skipping proper access planning for trucks, ignoring drainage and grade changes, and choosing the wrong hardware for heavy use.
Material, height, linear footage, terrain, number of gates, operator and access control needs, security upgrades, and permit requirements.
It depends on coating, environment, and traffic. Industrial areas, salt exposure, and frequent gate cycles can shorten life without the right materials and maintenance.
Plan phases around receiving hours, define temporary access points, and coordinate utility locates, deliveries, and concrete cure times with your operations team.
Ask about code and permit handling, experience with your property type, traffic and truck access planning, material specifications, warranties, and whether they follow applicable standards and inspection practices.
Gates & Access Control
Slide gates are common where space behind the gate is limited or wind load is a concern. Swing gates need clear swing area and can be affected by slope and wind. Your site layout usually determines the best option.
Common options include keypad entry, card or fob, phone based entry, intercom, vehicle detection loops, and other controlled access devices depending on the site.
Not always. Some systems use cellular controllers or local programming. Internet can enable remote management, logs, and app features, but it is not required for basic operation.
Most operators require reliable power at the gate location. Solar is possible on some sites, but it depends on usage cycles, climate, and battery capacity.
You can plan for battery backup and a manual release. For commercial sites, plan emergency access procedures and confirm how first responders can enter.
UL 325 is a widely referenced safety standard for automated gate operators that addresses entrapment risks and usage classifications.
Where entrapment risk exists, UL 325 guidance commonly requires at least two independent means of entrapment protection for each direction of travel, using devices like monitored photo eyes and or edge sensors, plus the operator's inherent reversing where applicable.
They are safety devices that the operator can supervise for faults. Some guidance emphasizes monitored safety entrapment devices at entrapment points on newer listed systems.
Yes: missing or incorrectly placed sensors, unprotected pinch points, poor gate construction, and bypassing safety checks.
Yes. Operator performance and safety depend on a gate that is properly built, aligned, and moves smoothly. Poor gate construction causes failures and safety issues.
Operators are rated for usage classes and duty cycles. Match the operator class to your site type and expected traffic.
Regular checks of rollers, hinges, chain racks, alignment, and safety devices. Plan a service schedule, especially for commercial sites with high daily cycles.
Entrance width, slope and grade, power availability, desired access methods, vehicle types using the gate, and any code or HOA requirements.
Ask whether they install to UL and ASTM related practices, how they design entrapment protection, what safety devices are included, how they handle power and backup, what happens in emergencies, and what ongoing maintenance is recommended.
For homes: keypad plus phone access, battery backup, and a simple service plan. For businesses: keypad or credential access, vehicle detection loops, audit logs, remote management, and a defined emergency access process.
